Siemens TC35 - Manual (Page 27)

25
Interface description
Interference immunity
• The connecting cable must not exceed
1.8m in length.
• Nominal signal range: ±15V
• Max. load current 1A
• Electrical fast transient burst
requirements not specified
• Surge immunity requirements not
specified
• Electrostatic discharge requirements in
accordance with ETS 300-342-1
• Immunity RF common mode
0.15–80MHz in accordance with
ETS300-342-1
Connectible RS232 connecting cable
Item Order
no. Supplier
RS232 connecting cable
9-pin D-Sub
extension 1:1 300574 Tecline
Behrener Str. 8
D-66117 Saarbrücken
Tel.:+49(0)68192678-29
Fax:+49(0)68192678-50