Spalding M60 1111 - Manual (Page 28)

28
P/N M601111 08/05
2.
A. While holding handle, remove pin (27).
B. Move elevator up or down to desired height.
C. Replace pin (27) full length to lock system at
desired height.
27
A.
B.
C.
58
DO NOT ALLOW
CHILDREN TO
ADJUST HEIGHT.
WARNING!
42
1.
Apply Height Adjustment and Moving Label (42) to front of pole, where it is clearly
visible.
SECTION G: HEIGHT ADJUSTMENT AND MOVING LABEL
EXACTA-HEIGHT : ADJUSTMENT
PORTABLE
511679
Size = 4" x 5.5"
Corner Radius = 3/8"
Die Cut Label
3.25 Mil Vinyl
All Temp. Permanent Adhesive
1 Mil. Polypropolyne Overlaminate
Illustrator 8.0 = EPS
Backing + 1/16 Circumference
Rolls of 500
2
2
1
3
TO ADJUST BACKBOARD:
1. While holding handle, remove pin.
2. Move elevator up or down to
desired height.
3. Replace pin full length to lock
system at desired height.
511679 05/05
1
2
4
3
MOVING SYSTEM
Adjust basketball backboard
height to lowest position.
While holding pole, rotate
basketball system forward
until wheels engage with
ground.
Move basketball system to
desired location.
Carefully rotate basketball
system upright.
1.
2.
3.
4.
5. Check system for stability.
HEIGHT ADJUSTMENT