Before you call for service – Speed Queen W446I User Manual
Page 41
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
39
38970
Before You Call for Service
You may save time and money by checking the
following:
If the Washer:
Won’t
Fill
Won’t
Start
Won’t
Agitate
Won’t
Spin
Possible Reason – Do This to Correct
•
•
•
•
Place coin(s) in slide or drop (metered models only).
•
•
•
•
Push timer knob in to start the washer (nonmetered
models only).
•
•
•
•
Be sure the power cord is plugged all the way into the
electrical outlet.
•
•
•
•
Close the loading door.
•
•
•
•
Check the laundry room fuse or circuit breaker.
•
•
•
•
Has the motor overload protector cycled? Refer to
page 38.
•
Turn on the hot and cold water faucets.
•
Was the last spin completed?
•
Water is siphoned from the washer during the cycle.
Refer to page 21.
•
•
Are the controls properly set?
•
•
Have a qualified electrician check polarity and
grounding. Refer to page 17.
•
Clean the screens in the water mixing valve and the filter
screens in the fill hoses.