Shure scm262 – Shure SCM262 User Manual
Page 5
5
SHURE SCM262
DESCRIPTION
The Shure Model SCM262 is a stereo mixer intended for sound rein-
forcement applications that integrate microphones with consumer stereo
products. It incorporates two active-balanced microphone inputs with
three unbalanced stereo aux level inputs.
The SCM262 Stereo Mixer is designed for restaurants, classrooms,
corporate training, aerobics classes, and other situations where a paging/
public announcement system is combined with background music or oth-
er program material.
FEATURES
•
Designed to combine paging with background music.
•
One active-balanced, XLR microphone input channel.
•
One active-balanced XLR microphone and 1/4-in. TRS line in-
put channel.
•
Three STEREO INPUT channels
•
Stereo AUX level OUTPUTs
•
Stereo MIC/LINE OUTPUTs
•
BASS and TREBLE tone controls on the master output.
•
1/2-rack chassis.
•
12 V phantom power for condenser microphones.
•
Internal power supply.
•
Removable power cable.
•
Ducking function (defeatable).
•
Jukebox mute function (defeatable).
FRONT PANEL
MIC Channel Gain Controls, 1-2. Control the gain levels
of the MIC channels and LINE IN 2 (MIC 2).
STEREO Channel Gain Controls, 1-3. Control the gain
levels from CD players, juke boxes, VCRs, or other con-
sumer stereo equipment connected to the STEREO inputs.
BASS and TREBLE Controls. Control the boost/cut of the
low- and high-frequency of the shelving filters.
MASTER Gain Control. Allows adjustment of the overall
output gain.
POWER Indicator. Lights up to indicate when the unit is
plugged in and receiving power.
NOTE: The SCM262 does not have a power switch. To turn
the unit off, unplug the power cord or use an external power
strip with a switch. However, it can remain plugged in as it uses
very little power when idle.
REAR PANEL
Power Connector. Accepts 100-120 Vac (SCM262) or
220-240 Vac (SCM262E).
Left/Right MIC/LINE Output Connectors. These 1/4-in.
connectors are stereo, balanced outputs for use with pro-
fessional audio equipment. Controlled by DIP switch.
Left/Right AUX Output Connectors. These phono jacks
are stereo, unbalanced outputs for use with consumer ste-
reo equipment.
DIP Switches. These allow you to adjust the SCM262 for
specific applications. See DIP Switches.
Left/Right STEREO INPUTS, 1-3. These phono jacks are
stereo inputs for connection to consumer stereo devices.
MIC Channel 2 INPUT. Microphone channel 2 has two
available inputs. There is a 1/4-in. connector for balanced/
unbalanced line-level connections, or an XLR connector for
balanced mic-level connections.
MIC Channel 1 INPUT. This is an XLR connector for bal-
anced mic-level connections.
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
6
7
1
2
3
4
5
6
7