Skyworth LCD-22L19 - Manual (Page 11)

For using the remote control, follow these instructions:
Point the remote control towards the infra-red remote sensor on the main unit.
If there is an obstacle between the main unit and remote control, the remote
control may not operate properly.
3. Replace t
When the battery is to be exhausted, electrolyte-leaking may occur and damage
may be caused to the remote control. When the operation is not sensitive, the
batteries may become weak, so please replace the batteries.
6. If the remote control is not to be used for a long period of time, please remove
the batteries to avoid electrolyte leaking.
1. Open the back cover of the remote control, then insert two AAA batteries
with polarities matching with the marks inside the battery compartment. Then,
close the back cover.
2.
he batteries immediately once the remote control is found not to work
properly.
4. Do not mix new batteries with old ones, or batteries of different brands.
5.
EXTERNAL SCHEMATIC AND INSTALLATION
10
Television
You should have:
User Guide
Remote control
Warranty Card
2 x AAA battery
Stand
Wall mount
PACKAGING