Sony 4-183-746-11(1) - Manual (Page 22)

22
Changing the flash mode
Press the MODE button.
• The indicator on the LCD panel changes as follows.
When the flash unit is not connected to your camera, or when the camera is in
power save mode or the LCD monitor is being turned off when the flash unit is
connected to your camera:
( AUTO) t WL t t ( AUTO) t . . .
When your camera is turned on and the flash unit is connected to your camera
(WL is not set up) :
( AUTO) t t ( AUTO) t . . .
• [ AUTO] lights up when the camera is set to Autoflash. Only [ ] lights up
when the camera is set to Full-flash.