Smeg C9GMXA User Manual
Smeg Radio
Advertising
Table of contents
Document Outline
- 1. PRECAUTIONS FOR USE
- 2. INSTALLING THE APPLIANCE
- 2.1 Electrical connection
- 2.2 Electrical connection
- 2.3 Gas connection
- 2.4 Ventilation requirements
- 2.5 Clearance above and around domestic cookers
- 1 Overhead clearances - (Measurement A)
- 2 Side clearances - (Measurements B & C)
- 3 Additional requirements for Freestanding and Elevated Cooking Appliaces - (Measurements D & E)
- 1 1 Requirement 3 does not apply to a freestanding or elevated cooking appliance which is designed to prevent flames or the cooking vessels from extending beyond the periphery of the appliance.
- 2 2 The ‘cooking surface area’ is defined as that part of the appliance where cooking normally takes place and does not include those parts of the appliance containing control knobs.
- 3 3 For definition of hob, see Clause 1.4.64.
- 4 4 For definition of trivet, see Clause 1.4.109.
- 5 5 Consideration is to be given to window treatments when located near cooking appliances. See Clause 5.3.4.
- 2.6 Instruction for wall fixing (only on some models)
- 3. ADAPTATION TO DIFFERENT TYPES OF GAS
- 3.1 Changing nozzles
- 1 Extract the grids and remove all the caps and flame-spreader crowns;
- 2 Unscrew the burner nozzles with a 7 mm socket wrench;
- 3 Replace the nozzles according to the type of gas to be used and the description in paragraph "3.2 Burner and nozzle characteristics table";
- 4 Replace the burners in the correct position.
- 3.2 Burner and nozzle characteristics table
- 3.3 Arrangement of the burners on the hob
- 3.1 Changing nozzles
- 4. FINAL OPERATIONS
- 5. GETTING TO KNOW YOUR COOKER
- 6. DESCRIPTION OF FRONT PANEL CONTROLS
- 7. USING THE HOB
- 8. USING THE OVEN
- 9. AVAILABLE ACCESSORIES
- 10. ELECTRONIC PROGRAMMER
- 11. CLEANING AND MAINTENANCE
- 12. EXTRAORDINARY MAINTENANCE