Samsung GH68-03299A - Manual (Page 68)

129 128
Reference Information
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
The access codes (except for the PUK and PUK2 codes)
can be changed using the Security Settings menu
option. See page 95 for further details.
Phone Password
The phone password can be set to avoid unauthorised
use of the phone. The default password supplied with
the phone is 0000, but you are advised to change it
before you start using your phone. Keep the new code
secret and in a safe place, separate from the phone.
If you key in an incorrect password five times in
succession, the phone will not accept the correct code
for the next five minutes.
S So ollv viin ng g P Prro ob blle em mss
The phone starts beeping and “**Warning** Battery
Low” flashes on the display
• The battery is insufficiently charged. Replace the
battery and recharge it or connect the travel adapter.
The audio quality of the call is poor
• Check the signal strength indicator on the display ( );
the number of bars indicates the signal strength from
strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you recall a phonebook
entry
• Check that the numbers have been stored correctly,
by using the Phonebook Search feature.
• Re-store them, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.