Samsung DV338AEW - Manual (Page 30)

30_ troubleshooting
troubleshooting
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Dryer.
ERROR DISPLAY MEANING SOLUTION
tS The Thermistor resistance is very low
or high. Try restarting the cycle.
If the problem continues call for service.
tO
dO Running the dryer with door open Close the door and then restart.
If the problem continues call for service.
dF Invalid state for more than 256
milliseconds Call for service.
bE Invalid state of key circuit short for
75secs Make sure a button is NOT being pressed
continuously. Try restarting the cycle.
If the problem continues call for service.
oD Invalid Dry time in excess Dry time Call for service.
hE Invalid heating Temp in running the
dryer Call for service.
Et Invalid state of Eeprom
communication Try restarting the cycle.
If the problem continues call for service.
FE Invalid power source Frequency Try restarting the cycle.
If the problem continues call for service.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
DV338AER-02571A_EN.indd 30 2008-02-14 ¿АИД 4:23:49