Samsung 700T User Manual

Page 5

Advertising
background image

Firmware for UEFI
boot

on the bezel.

Select “ENTER SETUP”

(note: if you do not have a USB keyboard attached

you can use the VOL+/VOL- keys to select, Rotation Lock button as “enter”, and both vol
buttons at the same time to go back.)

Select ADVANCED

Change “

UEFI Boot Support

” to

“Enabled

Save settings and exit.

STEP #4
Download
Windows 8
Customer Preview
Build

Options for Installing:

Download Windows 8 Customer Preview from Microsoft @

http://preview.windows.com

and follow the prompts to install.

Use a DVD or USB key to install (if needed, download the build from
preview.windows.com and copy the files from c:/Windows ESD/ to a
bootable USB key.)

STEP #5
Install Windows 8
Customer Preview

Follow the below steps if you are installing for installing from your newly
created USB key or DVD.

Shut down/power off the PC. Press the computer’s Power button while
holding down “Home Button”, which is the “HOME/WINDOWS”
hardware key on the bezel (Enter BIOS Setup). Go to Exit menu with
the combination Rotation Key and VOL+/-. Select your USB key or
attached USB DVD drive listed on Boot Override by using VOL+/VOL-
Key(The initial string is “UEFI:”, for instance in the case of DVD, You
should select “UEFI: USB CD/DVD Drive”). Press Rotation key as Enter
Key.

Follow the prompts to install Windows 8 Technical Preview on your system.

(note: installation will complete with three unknown devices in Device Manager, the
below steps will resolve these driver issues.)

STEP #6

Once the Windows 8 install has successfully completed the next step is to

Advertising