Samsung HT-UP30 - Manual (Page 8)

GB
13
CONNECTIONS
14
Choose one of the three methods for connecting to a TV.
Connecting the Video Out to TV
VIDEO
IN
COMPONENT
IN
TV
S-Video
METHOD 1
METHOD 3
METHOD 2
• Make sure the colors of the speaker terminals
match the colors of the connecting plugs.
Black
Press down the terminal
tab on the back of the
speaker. 1 Insert the black wire into
the black terminal (–) and
the gray wire into the gray
(+) terminal, and then
release the tab. 2 Connect the connecting plugs to
the back of the DVD player. 3
Gray
Back of the Speakers Back of the Main Unit
Rear Speaker (R)
Front Speaker (R)
Subwoofer
Center Speaker
Rear Speaker (L)
Front Speaker (L)
Blue Gray Purple
White Red
Green
HT-TP33
• When the Progressive scan mode is selected, the VIDEO and S-VIDEO
outputs do not feed any signal. Note
METHOD 1 Composite Video ............... Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
METHOD 3 Component (Progressive Scan) Video ............... Best Quality
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
METHOD 2 S-Video ............... Better Quality
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
* Depending on your TV, Component Video input connectors may be marked as DVD Video input connectors.