Samsung SRP-350PLUSA&C - Manual (Page 21)

Rev. 1.02 - 21 -
SRP-350plusA&C
4. Specification
Item Details
Printing Method Thermal Line Printing
Dot Density
SRP-350plus: 180 X 180 dpi (7dots/mm)
SRP-352plus: 203 X 203 dpi (8dots/mm)
Printing Width 57.5mm, 72.192±0.2mm
Characters per line
(Default) SRP-350plus: 42 (Font A) / 56 (Font B)
SRP-352plus: 48 (Font A) / 64 (Font B)
Printing Speed *1)
47 lines/sec (1/6” Feed)
200 mm/sec
Receive Buffer Size 64K Bytes
SMPS Input Voltage 100/240 VAC
Frequency 50/60 Hz
SMPS Output Voltage
+24 VDC
Temperature
0 ~ 40 (Operating) ୅
-10 ~ 50 (Storage) ୅
Humidity
30 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
; Except for paper
Auto Cutter 1,800,000 Cuts
Printer
Mechanism MCBF *2) 70,000,000 Lines
Paper Type Paper Roll
Roll Width 79mm~80mm, 82.5mm
Roll Diameter Max 83mm
Paper Thickness 0.07mm
Paper
Paper Tube
Inner: Ø12mm (0.47”)
Outer: Ø18mm (0.71”)
Note ୔
*1) Printing speed may be slower depending on the data transmission speed and the
combination of control commands.
*2) The above values are calculated under printing level 2 with recommended paper at
normal temperature. The values may vary with environment temperature, printing
level, etc.