Solid State Logic 82BXEM01A - Manual (Page 10)

6
Stereo Outputs - Direct Channel Outs (CH OP), Post Fader
Each X-Panda Stereo channel features a dedicated Channel Output (CH OP). This
provides a direct Stereo Output.
Normally this is sourced Pre Fader but by engaging the “POST” switch that source
becomes Post Fader. The Channel Direct Outputs (CH OP) are primarily used to feed
the inputs of your chosen recorder or DAW. On the rear panel connection panel of X-
Panda they are labelled “CHAN OUT ST 1-4”.
(Note that there is no “ALT” option on the X-Panda Stereo Channels)
Stereo Cue Send
Provides a Stereo Send primarily for Cue purposes. By default the signal is sourced
pre fader but additionally it can be sourced after the Channel Fader by selecting
“POST”. It may be worth bearing in mind that if you are using X-Panda in
conjunction with an X-Desk and on the X-Desk are using the “Cue to MIX” function
you may wish to turn this CUE ST send off on the X-Panda Stereo channels.
FX Sends 1&2
There are two FX sends on the Stereo channels and they take a summed Mono signal
of your Stereo Input source. By default the signal is sourced post Fader.