Document Outline

• SIMATIC Industrial PC SIMATIC Panel PC 877
• Table of contents
• 1 Foreword
  • 1.1 Overview
• 2 Safety information
  • 2.1 Safety information
  • 2.2 General information
• 3 Description
  • 3.1 Design
  • 3.2 Technical features
  • 3.3 Accessories
• 4 Application planning
  • 4.1 Overview
  • 4.2 Unpacking and checking the delivery
  • 4.3 Device identification data
  • 4.4 Mounting Positions and Fastening
    • 4.4.1 Installation guidelines
    • 4.4.2 Permitted mounting positions
    • 4.4.3 Type of fixation
    • 4.4.4 Protection against dust and water
  • 4.5 Mounting cut-out
    • 4.5.1 Preparing the mounting cut-out
    • 4.5.2 Mounting depth of the device
  • 4.6 EMC directive
• 5 Installation
  • 5.1 Securing the device with clamps
  • 5.2 Securing the device with screws
• 6 Connecting
  • 6.1 Connection and operator control components
  • 6.2 Connecting the 100 V to 240 V AC power supply
  • 6.3 Connecting the 24 V DC power supply
  • 6.4 Connecting the equipotential bonding circuit
• 7 Integration into an automation system
  • 7.1 Overview
  • 7.2 Device in a SIMATIC S7 configuration
    • 7.2.1 MPI/PROFIBUS-DP network
    • 7.2.2 Connecting an S7 automation system
  • 7.3 Networking via Industrial Ethernet
• 8 Commissioning
  • 8.1 Overview
  • 8.2 Switch on the device
  • 8.3 Setting up the Microsoft Windows operating system
  • 8.4 Installing applications and drivers
  • 8.5 BIOS settings
  • 8.6 Microsoft Windows operating system
    • 8.6.1 Enables
    • 8.6.2 Windows 2000 Professional
    • 8.6.3 Windows XP Professional
  • 8.7 USB
• 9 Operation and configuration
  • 9.1 Normal operation
    • 9.1.1 Switch on the device
    • 9.1.2 Logging on to the operating system via the onscreen ke
    • 9.1.3 Switching off the device
  • 9.2 Additional Drivers and Applications
    • 9.2.1 Overview
    • 9.2.2 Calibrating the touch screen, UPDD
    • 9.2.3 Enable/disable touch functionality
    • 9.2.4 Windows Security Center (Windows XP Professional only)
    • 9.2.5 KeyTools (for key panel devices only)
    • 9.2.6 Screen keyboard (for touch panel device only)
    • 9.2.7 Setbrightness
    • 9.2.8 CheckLanguageID
    • 9.2.9 Multilingual settings for the operating system
    • 9.2.10 DVD ROM/CD RW
    • 9.2.11 USB keyboard controller
• 10 Operation
  • 10.1 Status displays
  • 10.2 General control elements
  • 10.3 Device with key panel
    • 10.3.1 Using the keyboard
    • 10.3.2 Using the direct control key module
    • 10.3.3 Labelling function keys and softkeys
    • 10.3.4 Using the integrated mouse
  • 10.4 Device with touch screen
    • 10.4.1 Using the touch screen
  • 10.5 Disk drive
  • 10.6 Transferring authorizations
• 11 Functions
  • 11.1 Overview
  • 11.2 Safecard on Motherboard (SOM)
  • 11.3 Temperature monitoring
  • 11.4 Watchdog (WD)
  • 11.5 Fan monitoring
• 12 Maintenance and service
  • 12.1 Servicing
  • 12.2 Replacement parts
  • 12.3 Separating the control unit from the computer unit
  • 12.4 Installing and removing hardware components
    • 12.4.1 Repairs
    • 12.4.2 Open the device
    • 12.4.3 Installing and removing memory modules
    • 12.4.4 Installing PCI / AT cards
      • 12.4.4.1 Notes on the modules
      • 12.4.4.2 Installing / removing expansion modules
      • 12.4.4.3 Exchanging the RAID controller PCI card
    • 12.4.5 Disk drives
      • 12.4.5.1 Options of installing disk drives
      • 12.4.5.2 Installing / removing a drive bay
      • 12.4.5.3 Removing and installing an optical drive
      • 12.4.5.4 Removing and installing a 3.5" hard disk
    • 12.4.6 Replacing the backup battery
    • 12.4.7 Removing/Installing the Power Supply
  • 12.5 Installing Software
    • 12.5.1 General installation procedure
    • 12.5.2 Setting up the partitions for Windows operating syste
    • 12.5.3 Compatibility of the Restore DVD
    • 12.5.4 Restoring the factory state of the software using the
    • 12.5.5 Installing Microsoft Windows operating systems
      • 12.5.5.1 Operating system not installed
      • 12.5.5.2 Booting from the Recovery CD
      • 12.5.5.3 Installing the Microsoft Windows operating system (
      • 12.5.5.4 Installing the Microsoft Windows operating system (
    • 12.5.6 Installing individual drivers
    • 12.5.7 Operation of two hard disks
      • 12.5.7.1 2 HDD system
      • 12.5.7.2 RAID system with Promise Fast Track Controller TX23
      • 12.5.7.3 Installing the RAID Controller software
    • 12.5.8 Installing burner and DVD software
    • 12.5.9 Backing up the hard disk
• 13 Alarm, error and system messages
  • 13.1 Boot error messages
  • 13.2 Introduction to the BIOS beep codes
  • 13.3 BIOS beep codes
• 14 Troubleshooting/FAQs
  • 14.1 General problems
  • 14.2 Problems when Using Modules of Third-party Manufacturer
  • 14.3 Temperature limits
• 15 Technical data
  • 15.1 General technical data
  • 15.2 Power requirements of the components
  • 15.3 Device with AC voltage supply
  • 15.4 Device with DC voltage supply
  • 15.5 Keyboard table
• 16 Dimension drawings
  • 16.1 Panel PC 877 dimensional drawing
  • 16.2 Dimensional drawings for the installation of expansion
• 17 Detailed descriptions
  • 17.1 Motherboard
    • 17.1.1 Structure and functions of the motherboard
    • 17.1.2 Technical features of the motherboard
    • 17.1.3 Position of the ports on the motherboard
    • 17.1.4 External interfaces
    • 17.1.5 Front interfaces
    • 17.1.6 Internal interfaces
  • 17.2 Bus board
    • 17.2.1 Layout and principle of operation
    • 17.2.2 Assignment of the PCI IRQ channels to the PCI slots
    • 17.2.3 Exclusive PCI hardware interrupt
    • 17.2.4 ISA slot pin assignment
  • 17.3 Operating system licenses
  • 17.4 Cables
  • 17.5 System resources
    • 17.5.1 Currently allocated system resources
    • 17.5.2 System resources used by the BIOS/DOS
      • 17.5.2.1 I/O address allocation
      • 17.5.2.2 Interrupt Assignments
      • 17.5.2.3 Memory address assignments
  • 17.6 BIOS setup
    • 17.6.1 Overview
    • 17.6.2 Starting BIOS Setup
    • 17.6.3 BIOS setup menus
    • 17.6.4 Main menu
    • 17.6.5 Advanced menu
    • 17.6.6 Security menu
    • 17.6.7 Power menu
    • 17.6.8 Boot menu
    • 17.6.9 Version menu
    • 17.6.10 Exit menu
    • 17.6.11 BIOS setup default settings
• A Appendix
  • A.1 Certificates and guidelines
  • A.2 Additional support
• B ESD directives
  • B.1 ESD guideline
• C List of abbreviations / acronyms
  • C.1 Abbreviations
• Glossary
• Index
  • <
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • K
  • L
  • M
  • N
  • O
  • P
  • R
  • S
  • T
  • U
  • V
  • W