Sony DPS5032N - Manual (Page 61)

Connecting to an amplifier equipped with a digital audio input
Connections
61
V O L U M E P H O N E S A U D I O V I D E O
DC IN 9.8V
S-VIDEO OUT LINE SELECT
IN OUT
To AUDIO IN/OUT To digital audio input
(optical)
Optical cable (Not supplied)
Right side of unit
Amplifier equipped with a
digital audio input
Front speaker
(left)
Front speaker
(right)
You must set the LINE SELECT
switch to the "Out" mode
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver
equipped with a digital audio input and speaker system (right and left front speakers).
NOTES:
For all connections
• Connect the OPTICAL OUT of the player to the “OPTICAL” input of a Receiver or Processor.
• Refer to the owner’s manual of your audio equipment as well.
• Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the
equipment from the wall outlet before making any connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a
moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiv-
er power on, the speakers may be damaged.