Step 4: connecting the audio cords, Select a connection – Sony DVP-NS725P User Manual
Page 19
19
H
ook
up
s
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects: TVS DYNAMIC (page 46),
TVS WIDE (page 46)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 46)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 46).
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 67)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1ch) (page 67)
– DTS (5.1ch) (page 67)
A
D
A
B
C
D
,
continued