Sennheiser Rack-mount Receivers EM 2050 - Manual (Page 14)

Putting the receiver into operation
13
Connecting the mains cable
̈
Pass the mains cable through the cable grip µ .
̈
Connect the mains cable to the mains socket ¾ .
̈
Plug the mains plug into the wall socket.
The
STANDBY button º is backlit in red.
CAUTION! Damage due to electric current!
If you connect the receiver to an unsuitable power supply, this can cause damage to the
device.
̈
Use the supplied mains cable to connect the receiver to the mains (100 to 240 V AC, 50 or
60 Hz).
̈
Ensure a reliable mains ground connection of the receiver – especially when you are using
multi-outlet power strips or extension cables.
50/60Hz 0.25A 100 - 240V
¾ µ