Set the angle of the wall-mount bracket, English – Sharp AN-65AG1 User Manual

Page 8

Advertising
background image

ENGLISH

E-7

These screws are used for the angle
setup in Step 2.

Hole at the very top

Set the angle of the wall-mount bracket

• Please perform this work before mounting the LCD color TV on the wall.

• When setting the angle of the wall-mount bracket, be careful not to pinch your fingers, etc.

Remove the perpendicular positioning screws from the wall-mount bracket (2 screws

each on the left and right sides).

Assemble the included angle setup brackets as shown in the illustration and then use

them to set the TV to the desired angle.

For the screws, use the included angle setup bracket screws (M8 length: 15 mm

× 2 screws)

and screws removed in Step 1.

First loosely tighten the 4 screws and then securely tighten them after the angle setup bracket

is set to the desired position.

0

20

15

10

5

5

10

15

20

15

10

5

20

0

The numbers 5, 10, 15, and 20 at the
screw holes mean that the higher the
number, the more the LCD color TV
slants downward. The angle that can
be set is limited depending on the
TV model.

Caution

Included part

Angle setup bracket screws

M8 length:

15mm (2 screws)

Angle setup bracket

1

2

Advertising