Sony HANDYCAM HDR-FX1000E - Manual (Page 58)

58
* Change the settings according to the TV connected.
b Notes
• If you connect your camcorder to the TV using more than one type of cable to output images, the order of
priority of the TV input jacks is as follows:
HDMI t component video t S VIDEO t video.
• See page 108 for the details of i.LINK.
When connecting to your TV via a VCR
Select the connecting method on page 81 depending on the input jack of the VCR. Connect
your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the
input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
: Signal flow
Type Camcorder Cable TV Menu Setting
(IN/OUT REC)
menu t
[VCR HDV/DV] t
[AUTO] (p. 74)
[TV TYPE]
t
[16:9]/[4:3]* (p. 76)
z Tips
• When connecting only an S VIDEO plug (S VIDEO channel), audio signals are not output. To output
audio signals, connect the white and red plugs of the A/V connecting cable with S VIDEO to the audio
input jack of your TV.
• This connection produces higher resolution pictures compared with the A/V connecting cable (Type ).
(IN/OUT REC)
[VCR HDV/DV] t
[AUTO] (p. 74)
[TV TYPE]
t
[16:9]/[4:3]* (p. 76)
2
A/V connecting cable with
S VIDEO (optional)
(Red)
(White)
(Yellow)
2
A/V connecting cable
(supplied)
(Red)
(White)
(Yellow)
Playing the picture on a TV (Continued)