Sharp AR-PB8 User Manual
Page 11
Advertising
B. Copier shield plate disassembly
•
Remove screws, and remove the shield plate.
C. PWB fixing plate installation
•
Fix the plate with screws.
D. Printer PWB installation
•
Fix the printer PWB with screws.
•
Before introduction of the Expansion memory, the PS PWB, or
the network PWB, this procedure must be performed.
E. Mother board installation (Packed together with
the LCD kit.)
•
Insert the connectors and fix them, then connect the connec-
tors of the copier to them.
F. Shield plate installation
•
Fix the shield plate with screws.
AR-PB8
3 – 2
Advertising