Samsung SPH-I300 - Manual (Page 18)

16
7UDLQLQJ WKH +DQGVIUHH &DU .LW
To train the Hands-free Car Kit for Voice Dial:
1. Train the phone for Voice Dial in Hand-held mode,
as specified in your phone Owner’s Manual.
2. Place the phone in the cradle and wait for the voice
and text prompts to guide you through the re-
recording process. The Hands-free Car Kit will dis-
play “to retrain Hands-free Voice-Dial Press [OK]”.
3. The Hands-free Car Kit will play the names as
recorded in Hand-held mode. Respond to the
prompt by repeating the name after the beep. The
Hands-free Car Kit stores the name as a first sam-
ple, and then prompts for the name again.
4. Respond to the prompt by repeating the name after
the beep. The Hands-free Car Kit stores the name as
a second sample and automatically links it with the
Voice Dial entry recorded in Hand-held mode.
5. If the Hands-free Car Kit cannot recognize the
name because of noise, the Hands-free Car Kit will
display “Cannot be recognized”.
3ODFLQJ 9RLFH 'LDO &DOOV ZLWK WKH 9RLFH 'LDO
%XWWRQ
Voice Dial is always active once you have trained the
Hands-free Car Kit to accept Voice Dial entries.
Remember that Hands-free Voice Dial entries must be
trained in Hand-held mode first, and then re-trained in
the Hands-free environment. To place Voice Dial calls,
press
. Say the name into the microphone after you
hear the voice prompt and the beep.
Note: The phone must be ON to make a Voice Dial call. If
the phone is off when a Voice Dial call is attempted, a
warning message is displayed that prompts you to turn the
phone ON.
1. From the phone main menu, press once on
the left side of the phone.
2. The Voice Dial screen is displayed.
3. At the voice prompt, say the name into the phone.
• If the name is recognized, the phone number associ-
ated with the name is dialed.
I300handsfree.book Page 16 Wednesday, October 24, 2001 10:22 AM