Samsung SCC-C6475P - Manual (Page 23)

3-18
E
3-17
■ And assign the user PC’s window network setting as following example.
Example) IP: 192.168.1.201
Subnet mask: 255.255.255.0
Gateway: 192.168.1.1
■ Execute the IPinstaller.exe in user PC and verify the IP, Subnet Mask and
Gateway connected to the SCC-C6475(P).
■ After completing the IP setting in the IPinstaller, enter the password and
click the “Apply” button. And the SCC-C6475(P) will reboot automatically.
● Password is the root user’s log in Password to access the
SCC-C6475(P).
● Password is set as basic value ‘4321’ when it is shipped.
■ User access http://192.168.1.200 by using the PC internet browser.
If the indicated content in the camera list is not the same as follows, fix the
setting as the follow Example.
Example) <SCC-C6475(P)> <User PC>
IP: 192.168.1.200 IP: 192.168.1.201
Subnet mask: 255.255.255.0 Subnet mask: 255.255.255.0
Gateway: 192.168.1.1 Gateway: 192.168.1.1
HTTP Port: 80
■ Accessing SCC-C6475(P) by using the internet browser, Log In page
as follow appears.
■ Log in at SCC-C6475(P) and the main screen that user can see
images appears.
■ After checking if the camera image works well, click the setup mode
button in the right up side of the main screen.
- User ID to Log In is set to a basic value ‘root’ when it was shipped
and the password is ‘4321’.