Samsung Blu-ray Disc - Manual (Page 41)

English - 41
S
ystem Setup
4 Press the … …† † buttons to select the desired audio
option from the options described below, then press
the ENTER or
√ button.
5 Press the … …† † buttons to select the desired item,
then press the ENTER button.
■ Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
NOTE
Digital Output
• PCM : Select this when your equipment does not
decode Dolby Digital.
• Bitstream : Outputs Dolby Digital or MPEG-2 or DTS
audio as bitstream. Select this when your
AV receiver or AV amplifier has a Dolby
Digital or MPEG-2 or DTS Decoder.
PCM Down Sampling
• On : Select this when the Amplifier connected to the
player is not 96KHz compatible.
In this case, the 96KHz signals will be down
converted to 48KHz
• Off : Select this when the Amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
■ LPCM sound track is always outputted as PCM.
■ Be sure to select the correct Digital Output or
you will hear no sound or a loud noise.
■ When playing a Dolby Digital movie make sure
the Digital Output is set to Bitstream.
■ If you have the unit connected via the 5.1
channel analog outputs and play a DVD Dolby
Digital disc, sound will only be heard from the
Front Left and Right speakers.
■ If you have the unit connected via any analog
output and play a DTS DVD disc, no sound
will be heard. To hear sound, the digital output
must be connected and set to Bitstream.
NOTE
■ Even when PCM Down Sampling is set to Off,
some discs will only output downsampled
audio though the digital outputs.
NOTE
HDMI
• If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS, MPEG), you
should set Digital Audio to PCM.
• If your TV is not compatible with LPCM sampling rates
over 48kHz, you should set PCM Down Sampling to On.
Setting up the Speaker
Options
1 With the unit in Stop mode, press the MENU
button.
2 Press the … …† † buttons to select Setup, then press
the ENTER or √ button.
3 Press the … …† † buttons to select Audio Setup, then
press the ENTER or √ button.
4 Press the … …† † buttons to select Speaker Setup,
then press the ENTER or √ button.
BD
BD Player Setup
Memory Card
Title
Music
Photo
Setup
√ √ Language Setup √ √
Audio Setup √ √
Display Setup √ √
Parental Setup √ √
BD
BD Player Audio Setup
Memory Card
Title
Music
Photo
Setup
√ √ Digital Output : PCM √ √
PCM Down Sampling : On √ √
Dynamic Compression : On √ √
Speaker Setup √ √
BD
BD Player Speaker Setup
Test Tone
L
Small
LS
Small
R
Small
Small
C
LFE
RS
Small
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
• Off : You can enjoy the movie with the standard
Dynamic Range.
• On : When Movie soundtracks are played at
low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
MOVE SELECT RETURN EXIT
MOVE SELECT RETURN EXIT
MOVE SELECT RETURN EXIT
A
A
A