Sanyo DIR-2000 - Manual (Page 21)

SDB Output Jacks Connection
21
Connect the SDB Output
jacks to a VCR’s A/V input
jacks.
Connect VCR A/V output
jacks to the TV
A/V input jacks.
➀
➁
➂
➂
➂
NOTES:
• For input and digital output connections, refer to the “Quick ‘N Easy”
Startup Guide Connecting Diagrams.
• DO NOT connect VCR/DVD RF output to the RF Input of the SDB. (See
page 18, figure 46.)
➀
➁
➂
➁
➀
Resetting the SDB
Use this feature to return all customer adjustable controls to the original factory settings.
1. Press RESET key on the remote control once, the on-screen message appears.
2. Press RESET key again to cancel all customized settings and return to factory settings.
NOTE: The SDB will return to the Initial power on procedures: Channel Search, Monitor Type
Selection, and Auto Clock/Day Setup process.
Factory Default Settings
Channel Search . . . . . . . . . Reset with initial setup procedures
Monitor Type Selection . . Reset with initial setup procedures
Clock/Day . . . . . . . . . . . . . Reset with initial setup procedures
Aspect Ratio . . . . . . . . . . . 4:3
Pix Shape . . . . . . . . . . . . . NTSC-Normal, DTV-Normal (for 4:3 Reception,
. . . . . . . . . . . . . . . . 16:9 Reception and 16:9 Aspect),
. . . . . . . . . . . . . . . . LetterBox (for 16:9 Reception and 4:3 Aspect)
Scan Mode . . . . . . . . . . . . Interlaced (480i)
CH Scan Memory . . . . . . . Reset with initial channel search
Initial Channel . . . . . . . . . . Off
Display Banner . . . . . . . . . Brief
Audio Reception . . . . . . . . NTSC-Stereo, DTV-Main
Digital Audio Out . . . . . . . S/P DIF
Menu Language . . . . . . . . English
Caption . . . . . . . . . . . . . . . Off
V-Guide . . . . . . . . . . . . . . . Off with all settings/rating limits cleared
Figure 59—Reset the SDB
Figure 60—Resetting the SDB to
factory default settings
Connect the SDB output jacks
to the TV Audio (L/R) input jacks
and S-Video input jack.
➂
SDB
TV BACK
VCR
QuickTips
■ A/V1 and A/V2 jacks
have identical func-
tions. Any compatible
video equipment can
be connect to either set
of jacks.
■ Make sure all cable
connectors are fully
seated on jacks.
■ Always match cables
according to the
colors on the jacks.
Need help?
Visit our Web site at
www.sanyoctv.com