Sennheiser Industry Acoustic System IAS-MO 2000 - Manual (Page 12)

10
Connecting the optical microphone to the weather and windshield
̈ Remove the windshield basket and open the flap in the pipe as shown.
̈
Remove the protection caps from the connectors of the fiber optic cable
ባ
.
̈
Push down the plastic housing on an even base until the housing detaches
from the connectors with an audible click.
Note:
Use a solid, even and clean base (e.g. a sheet of paper) in order to not
damage the tips of the connectors.
̈
Pull the connectors of the fiber optic cable
ባ
one after the other out of
the plastic housing.
̈
Remove the protection caps of the SCRJ-GOF socket inside the weather
and windshield.
̈
Observe correct polarity of the professionally ready-made cable, i.e. insert
the connectors of the fiber optic cable
ባ
into the SCRJ-GOF socket so that
the polarizing keys point outward. When the connectors are inserted
correctly, the polarizing keys lock into place with an audible click (see dia-
gram on page 9).
̈
Lay the remaining microphone cable around the microphone clamp.
Please note that fiber optic cable must not be bent like conventional cable.
Make sure not to bend it beyond a bend radius of 50 mm.
̈
Insert the optical microphone
ቢ
into the microphone clamp
ቮ
.
2
2
³ · »
B 2
1