SMC Networks SMCNAS04 - Manual (Page 23)

14
Step 2. Connect to the Network
1. Make sure that the computer, which you will install and perform Storage
System Management, is powered off and connected to the network hub /
switch.
2. Make sure that the network hub / switch is powered off.
3. Connect one end of the Ethernet cable to any of the four network connector
( ) on the back of your storage system and the other end to the network
hub / switch).
Please make sure that in your network a DHCP server is present. Either as a
separate server or build into a router, that can be used instead of the hub /
switch.