Samsung DCS KEYSET - Manual (Page 59)

Samsung DCS Keyset User Guide
– 50 –
Key Confirmation Tone
You normally hear a short beep (confirmation tone) each time you
press a key on the dial pad. This tone can be turned on or off.
1. While on-hook, press the
TRSF
key and dial 110.
2. Dial 041 to turn tones on or 040 to turn tones off. (Or use the soft
keys and
VOLUME
Up/Down keys to select.)
3. Press the
TRSF
key to store your selection.
Rejoining a Page
This feature allows you to hear the remaining portion of an ongoing
internal page after you return your keyset to idle. To enable this fea-
ture:
1. While on-hook, press the
TRSF
key and dial 110.
2. Dial 051 to turn this feature on or 050 to turn it off. (Or use the
soft keys and
VOLUME
Up/Down keys to select.)
3. Press the
TRSF
key to store your selection.
Ring Preference
This feature automatically answers ringing calls when you lift the
handset or press the
ANS/RLS
key. This method will always answer
calls in the order they arrived at your keyset. If you turn Ring Prefer-
ence off, you must press the flashing key to answer a call, allowing
you to answer calls in the order you choose.
1. While on-hook, press the
TRSF
key and dial 110.
2. Dial 061 to turn Ring Preference on or 060 to turn it off. (Or use
the soft keys and
VOLUME
Up/Down keys to select.)
3. Press the
TRSF
key to store your selection.