SATO CT410 - Manual (Page 87)

Form Overlay, Store
Command Structure <ESC>&
Example: <ESC>&
Placement: Must be preceded by all other data and placed just before
the Stop command (<ESC>Z)
Default: None
Command Function To store a label image in the volatile form overlay memory. Only one
label image may be stored in this memory area at a time.
Input to Printer <ESC>A
<ESC>H0001<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0001<ESC>V0165<ESC>B103100*12345*
<ESC>
&
<ESC>Z
Printer Output There is no output from this command. It stores the label image in the
overlay buffer.
Special Notes 1. Remember that this storage is volatile. Therefore, if the printer
loses power, the overlay must be sent again.
2. The overlay is recalled using the <ESC>/ Form Overlay Recall
command.
3. Form overlays do not have to be recompiled each time they are
called to be printed and therefore may result in much faster print
output.
4. The CT printers can only store one format.
Section 4. Programming Reference
SATO CT Series Printers 9001069 A Page 4-43