Sharp R-1514 - Manual (Page 20)

20
B E F O R E O P E R A T I N G
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, will appear in the display.
Touch the STOP/CLEAR pad and re-enter the time.
ERROR
• Before operating your new microwave oven make sure you read and understand this operation manual
completely.
• Before the oven can be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display will show
.
2. Touch the STOP/CLEAR pad. will appear.
3. Set clock.
:
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
P R O C E D U R E D I S P L A Y
1
2
3
Touch CLOCK pad and
number 2.
Touch CLOCK pad again.
Enter the correct time of
day by touching the numbers in sequence.
TIMER
CLOCK
TIMER
CLOCK
2
1 3 0 2
ENTER
12:30
12:30
T I ME
SHARP SIMPLY THE BEST PRESS CLEAR
AND PRESS CLOCK
SHARP SIMPLY THE BEST
AND PRESS CLOCK PRESS CLEAR
• If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show
after
the power is reinstated. If this occurs during
cooking, the program will be erased. The time of day
will also be erased. Simply touch STOP/CLEAR pad
and reset the clock for the correct time of day.
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
STOP/CLEAR
1.1 R-1510/11/12/14#349 4/1/03, 11:39 AM 20