Sony ECM CZ10 User Manual

Df g, Electret condenser microphone, Ecm-cz10

Advertising
background image

to microphone jack MIC
(PLUG IN POWER)
vers la prise microphone MIC
(PLUG IN POWER)
an Mikrofonbuchse MIC
(PLUG IN POWER)

Tape recorder, IC recorder or other
Magnétophone, enregistreur à CI ou
autre appareil
Kassettenrecorder, IC-Recorder o. ä.

Plug adaptor
Adaptateur de fiche
Zwischenstecker

B

2-668-497-11(1)

Electret Condenser
Microphone

Operating Instructions
Mode d’emploi
Bedienungsanleitung
Manual de instrucciones
Istruzioni per I’uso
Manual de instruções

ECM-CZ10

© 2006 Sony Corporation Printed in Japan

C

E

English

Before operating the unit, please read this manual thoroughly and retain it
for future reference.

Features

• Super-directional microphone employing removable phase tube system

for highly clear recording of sound sources at long distances.

• Supplied holding clip enables discreet usage, for example, in an

interview.

• Fold-out microphone stand built in to the supplied holding clip for desk

use.

• High quality sound (monaural).
• Supplied plug adaptor enables stereo recording equipment.
• Plug-in power supply system.

Precautions

• This microphone is a precision instrument. Never disassemble.
• Keep the microphone away from extremely high temperatures and

humidity (above 60 °C or 140 °F).

• The microphone should never be dropped or subjected to extreme shock

since it is very sensitive.

• When using the microphone outdoors, avoid exposing it to rain or

seawater. Clean the plug and case with a soft, dry cloth should they
become dirty.

• If the microphone is placed near loudspeakers, a howling effect (acoustic

feedback) may occur because it catches sound from the speakers again.
In such a case, place the microphone as far as possible from the
speakers, change the direction of the microphone, or decrease the
speaker volume until the howling effect stops.

• If the microphone becomes dirty, clean with a soft, dry cloth.
• Always hold the plug when disconnecting. Pulling the cord may cause it

to snap.

Identifying parts

(See fig. A.)

How to use

Connecting to a tape recorder with
plug-in power (See fig.
B1.)

The power of the microphone is supplied by the connected equipment.

Tip
Use the supplied plug adaptor for stereo recording equipment.
(See fig. B–2.)

Recording sound sources at long
distances

1

Attach the phase tube and holding clip to the microphone.
Insert the microphone in the phase tube so that the phase tube’s ridge
meets the groove of the microphone body. (See fig. C–1.)

Tip
To detach the phase tube, push the microphone slightly to release and
pull out.

2

Clip the holder into the groove of the microphone body.
(See fig.
C2.)

3

Point the microphone and holding clip in the direction of
the sound source.
The holding clip can be used as a desk-top stand by extending its feet
outwards. (See fig. D–1.)

Note
When adjusting the microphone angle with the phase tube attached,
turn the microphone together with the holding clip. If you turn the
microphone holder, the microphone may drop. (See fig. D–2.)

Recording nearby sound sources

Attach the microphone to the holding clip.

Clip the holder into the groove of the microphone body. (See fig. E–1.)
Turn the microphone holder to adjust the microphone angle.
(See fig. E–2.)

Using the holding clip as a desk-top stand (See fig. F.)
The holding clip can be used as a desk-top stand by extending its feet
outwards.

Using as a tie-clip microphone (See fig. G.)

Tip
If the stand feet cannot be stored inside the holding clip, slide back and
hold the slider on the side of the microphone holder and push the feet
inward until they click into position.

Specifications

Type

Electret condenser microphone

Plug

Gold-plated L-shaped monaural mini plug

Power

Plug-in power supply system

Dimensions (including projecting parts)

Microphone parts: Approx. ш 8

Ч 19 mm (diameter/length)

(

11

/

32

×

3

/

4

in)

Phase tube attached: Approx. ш12.5

Ч 109 mm (

1

/

2

× 4

3

/

8

in)

Holding clip attached: Approx. 53

Ч 107 Ч 30 mm

(height/length/width) (2

1

/

8

Ч 4

1

/

4

Ч1

3

/

16

in)

Mass

Approx. 18 g (0.64 oz) (phase tube and holding clip
attached/excluding plug adaptor)

Cord

OFC litz cord (1 core shielded) ø 1.5 mm (

1

/

16

in)

Length: Approx. 1 m (39

3

/

8

in)

Frequency response

100 – 10,000 Hz

Directivity

Super-directional/Uni-directional

Sensitivity

Open circuit output voltage level –33.0 ± 4.0 dB
0 dB = 1 V / Pa, 1,000 Hz (1 Pa = 10 µbar = 94 dB

SPL

)

Maximum sound pressure input level

Approx. 102 dB

SPL

3% wave distortion at 1,000 Hz

(0 dB

SPL

= 2

× 10

–5

Pa)

Operating temperature range

0 °C – 40 °C (32 °F – 104 °F)

Supplied accessories
Holding clip (1), Phase tube (1), Plug adaptor (mini-jack

y stereo

mini plug) (1), Carrying case (1), Operating Instructions (1)

Design and specifications are subject to change without notice.

Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other
European countries with separate collection
systems)

This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection

point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural resources. For more
detailed information about recycling of this product, please contact your
local Civic Office, your household waste disposal service or the shop
where you purchased the product.

The validity of the CE marking is restricted to only those countries where
it is legally enforced, mainly in the countries EEA (European Economic
Area).

D

F

G

1

2

1

1

2

Groove
Rainure
Kerbe

Groove
Rainure
Kerbe

Groove
Rainure
Kerbe

Ridge
Saillie
Kante

Ridge
Saillie
Kante

Ridge
Saillie
Kante

2

1

2

1 Phase tube

2 Microphone

3 Gold-plated L-shaped

monaural mini plug

4 Stand feet

5 Holding clip

6 Microphone holder

7 Slider

A

Français

Avant la mise en service de cet appareil, prière de lire attentivement ce
mode d’emploi et de le conserver pour toute référence ultérieure.

Caractéristiques

• Microphone super directionnel utilisant un système de tube à

interférences amovible permettant l’enregistrement parfaitement clair de
sources audio à de longues distances.

• La pince fournie permet une utilisation discrète, par exemple, lors d’un

entretien.

• Support de microphone pliable, intégré à la pince fournie permettant une

utilisation sur un bureau.

• Son de grande qualité (mono).
• L’adaptateur de fiche fourni permet l’utilisation d’un appareil

d’enregistrement stéréo.

• Système d’alimentation par enfichage.

Précautions

• Ce microphone est un instrument de précision. Ne jamais le démonter.
• N’exposez pas le micro à des températures excessives ou à l’humidité

(au-delà de 60 °C ou 140 °F).

• Ne laissez pas tomber le micro et ne l’exposez pas à des chocs violents

car il est très sensible.

• Lorsque vous utilisez le micro à l’extérieur, évitez de l’exposer à la pluie

ou à l’eau de mer. Nettoyez la fiche et le coffret avec un chiffon doux et
sec s’ils sont sales.

• Si le micro se trouve à proximité de haut-parleurs, un effet Larsen

(rétroaction acoustique) peut se produire car il capte de nouveau le son
des haut-parleurs. En pareil cas, éloignez le micro au maximum des
haut-parleurs, changez son orientation ou diminuez le volume des haut-
parleurs jusqu’à ce que l’effet Larsen cesse.

• Si le micro est sale, nettoyez-le avec un chiffon doux et sec.
• Débranchez toujours le microphone en tirant sur la fiche et non pas sur le

cordon. Il pourrait se couper.

Identification des pièces

(voir fig. A)

Utilisation

Raccordement à un magnétophone avec
une alimentation par enfichage
(voir fig.
B1)

Le microphone est alimenté par l’appareil raccordé.

Conseil
Utilisez l’adaptateur de fiche fourni pour un appareil d’enregistrement
stéréo. (Voir fig. B–2)

Enregistrement de sources audio à de
longues distances

1

Fixez le tube à interférences et la pince au microphone.
Insérez le microphone dans le tube à interférences, de sorte que la
saillie du tube à interférences entre en contact avec la rainure du
microphone. (Voir fig. C–1)

Conseil
Pour détacher le tube à interférences, poussez légèrement sur le
microphone pour le libérer et tirez.

2

Fixez le porte-pince sur la rainure du microphone.
(Voir fig.
C2)

3

Orientez le microphone et la pince vers la source audio.
Pour utiliser la pince sur un bureau, il suffit d’en déplier les pieds.
(Voir fig. D–1)

Remarque
Pour régler l’angle du microphone lorsque le tube à interférences est
fixé, tournez le microphone avec la pince. Si vous tournez le porte-
microphone, le microphone risque de tomber. (Voir fig. D–2)

Enregistrement près de sources audio

Fixez le microphone sur la pince.

Fixez le porte-pince sur la rainure du microphone. (Voir fig. E–1)
Tournez le porte-microphone pour régler l’angle du microphone.
(Voir fig. E–2)

Utilisation de la pince comme support de bureau (voir fig. F)
Pour utiliser la pince sur un bureau, il suffit d’en déplier les pieds.

Utilisation comme micro-cravate (voir fig. G)

Conseil
Si vous ne parvenez pas à ranger les pieds du support à l’intérieur de la
pince, faites-les glisser vers l’arrière et maintenez la glissière sur le côté du
porte-microphone, puis poussez les pieds vers l’intérieur jusqu’à ce qu’ils
s’encliquettent.

Spécifications

Type

Microphone à électret

Fiche

Mini-fiche mono en L plaquée or

Alimentation Système d’alimentation par enfichage
Dimensions (parties saillantes comprises)

Pièces du microphone : environ ш 8

Ч 19 mm (

11

/

32

×

3

/

4

po)

(diamètre/longueur)
Avec le tube à interférences fixé : environ ш12,5

Ч 109 mm

(

1

/

2

× 4

3

/

8

po)

Avec la pince fixée : environ 53

Ч 107 Ч 30 mm

(hauteur/longueur/largeur) (2

1

/

8

Ч 4

1

/

4

Ч1

3

/

16

po)

Masse

Environ 18 g (0.64 oz)
(avec tube à interférences et pince/sans adaptateur de fiche)

Cordon

Cordon de litz OFC (1 noyau blindé) ø 1,5 mm (

1

/

16

po)

Longueur : environ 1 m (39

3

/

8

po)

Réponse en fréquence

100 – 10 000 Hz

Directivité

Super directionnel/Unidirectionnel

Sensibilité

Niveau de tension en sortie en circuit ouvert - 33,0 ± 4,0 dB
0 dB = 1 V / Pa, 1 000 Hz (1 Pa = 10 µbar = 94 dB

SPL

)

Niveau d’entrée de pression acoustique maximale

Environ 102 dB

SPL

3 % de distorsion d’onde à 1 000 Hz

(0 dB

SPL

= 2

× 10

- 5

Pa)

Température de fonctionnement

0 ºC - 40 ºC (32 °F à 104 °F)

Accessoires fournis
Pince (1), tube à interférences (1), adaptateur de fiche (mini-prise

y

mini-fiche stéréo) (1), étui (1), Mode d’emploi (1)

La conception et les spécifications sont sujettes à modifications sans
préavis.

Traitement des appareils électriques et
électroniques en fin de vie (Applicable dans les
pays de l'Union Européenne et aux autres pays
européens disposant de systèmes de collecte
sélective)

Ce symbole, apposé sur le produit ou sur son emballage,
indique que ce produit ne doit pas être traité avec les

déchets ménagers. Il doit être remis à un point de collecte approprié pour le
recyclage des équipements électriques et électroniques. En s'assurant que
ce produit est bien mis au rebut de manière appropriée, vous aiderez à
prévenir les conséquences négatives potentielles pour l'environnement et la
santé humaine. Le recyclage des matériaux aidera à préserver les
ressources naturelles. Pour toute information supplémentaire au sujet du
recyclage de ce produit, vous pouvez contacter votre municipalité, votre
déchetterie ou le magasin où vous avez acheté le produit.

La validité du marquage CE est limitée uniquement aux pays dans lesquels
il fait force de loi, c’est-à-dire principalement dans les pays de I’EEE
(Espace Économique Européen).

Deutsch

Vor der Verwendung des Mikrofons lesen Sie diese Anleitung sorgfältig
durch und bewahren Sie sie zum späteren Nachschlagen gut auf.

Besondere Merkmale

• Super-Richtmikrofon mit abnehmbarem Aufsatz für besonders hohe

Aufnahmequalität auf größere Entfernung.

• Mitgelieferter Ansteckclip für den diskreten Einsatz z. B. bei Interviews.
• Ausklappbarer Mikrofonständer im mitgelieferten Ansteckclip zum

Aufstellen auf einem Tisch.

• Hohe Tonqualität (monaural).
• Aufnehmen von Stereogeräten dank mitgeliefertem Zwischenstecker.
• Plug-in-Power-System.

Zur besonderen Beachtung

• Das Mikrofon besteht aus Präzisionsteilen. Zerlegen Sie es auf keinen

Fall.

• Schützen Sie das Mikrofon vor extrem hohen Temperaturen (über 60 °C)

und hoher Luftfeuchtigkeit.

• Das Mikrofon ist sehr empfindlich. Lassen Sie es nicht fallen und setzen

Sie es keinen heftigen Stößen aus.

• Schützen Sie das Mikrofon bei Verwendung im Freien vor Regen und

Meerwasser. Entfernen Sie Verschmutzungen am Stecker und am
Gehäuse mit einem weichen, trockenen Tuch.

• Wenn das Mikrofon in der Nähe von Lautsprechern verwendet wird,

kann es zu einer akustischen Rückkopplung (Heulton) kommen, da der
Ton von den Lautsprechern erneut aufgenommen wird. Stellen Sie in
diesem Fall das Mikrofon möglichst weit von den Lautsprechern entfernt
auf, ändern Sie die Ausrichtung des Mikrofons oder verringern Sie die
Lautstärke der Lautsprecher, bis der Heulton aufhört.

• Reinigen Sie das Mikrofon, wenn es verschmutzt ist, mit einem weichen,

trockenen Tuch.

• Fassen Sie beim Lösen des Kabels stets am Stecker an. Ziehen Sie

niemals am Kabel, da es sonst beschädigt werden kann.

Lage und Funktion der Teile
und Bedienelemente

(siehe Abb. A)

Gebrauch

Anschließen an einen Kassettenrecorder
mit Plug-In-Power-Funktion
(siehe Abb.
B1)

Das Mikrofon wird vom angeschlossenen Gerät mit Strom versorgt.

Tipp
Verwenden Sie bei Geräten für Stereoaufnahmen den mitgelieferten
Zwischenstecker (siehe Abb. B–2).

Aufnehmen von Tonquellen auf größere
Entfernung

1

Bringen Sie den Aufsatz und den Ansteckclip am Mikrofon
an.
Setzen Sie das Mikrofon so in den Aufsatz ein, dass die Kante des
Aufsatzes die Kerbe am Mikrofongehäuse berührt
(siehe Abb. C–1).

Tipp
Zum Abnehmen des Aufsatzes drücken Sie das Mikrofon leicht
hinein, so dass es sich löst, und ziehen Sie es dann heraus.

2

Klemmen Sie den Halter in die Kerbe am Mikrofongehäuse
(siehe Abb.
C2).

3

Richten Sie das Mikrofon und den Ansteckclip auf die
Tonquelle.
Wenn Sie die Füße herausklappen, können Sie den Ansteckclip auch
als Standfuß für das Mikrofon verwenden (siehe Abb. D–1).

Hinweis
Beim Einstellen des Mikrofonwinkels mit angebrachtem Aufsatz
drehen Sie das Mikrofon zusammen mit dem Ansteckclip. Wenn Sie
den Mikrofonhalter drehen, kann das Mikrofon herunterfallen (siehe
Abb. D–2).

Aufnehmen von nahen Tonquellen

Bringen Sie das Mikrofon am Ansteckclip an.
Klemmen Sie den Halter in die Kerbe am Mikrofongehäuse

(siehe Abb E–1).
Drehen Sie den Mikrofonhalter, um den Mikrofonwinkel einzustellen
(siehe Abb. E–2).

Verwenden des Ansteckclips als Standfuß (siehe Abb. F).
Wenn Sie die Füße herausklappen, können Sie den Ansteckclip auch als
Standfuß für das Mikrofon verwenden.

Verwenden als Ansteckmikrofon (siehe Abb. G).

Tipp
Wenn sich die Standfüße nicht wieder in den Ansteckclip zurückklappen
lassen, schieben Sie den Schieber an der Seite des Mikrofonhalters zurück,
halten ihn fest und drücken die Füße nach innen, bis sie mit einem Klicken
einrasten.

Technische Daten

Typ

Elektret-Kondensatormikrofon

Stecker

Vergoldeter L-förmiger Mono-Ministecker

Stromversorgung

Plug-in-Power-System

Abmessungen (einschließlich vorstehender Teile und Bedienelemente)

Mikrofon: ca. ш 8

Ч 19 mm (Durchmesser/Länge)

Mit angebrachtem Aufsatz: ca. ш 12,5

Ч 109 mm

Mit angebrachtem Ansteckclip: ca. 53

Ч 107 Ч 30 mm

(Höhe/Länge/Breite)

Gewicht

ca. 18 g (einschl. Aufsatz und Ansteckclip, ohne
Zwischenstecker)

Kabel

OFC-Litzenkabel (1-adrig abgeschirmt), ø 1,5 mm
Länge: ca. 1 m

Frequenzgang

100 - 10.000 Hz

Richtcharakteristik superdirektional/unidirektional
Empfindlichkeit

Pegel bei Leerlaufausgangsspannung -33,0 ± 4,0 dB
0 dB = 1 V/Pa, 1.000 Hz
(1 Pa = 10 µbar = 94 dB

SPL

)

Maximaler Eingangsschalldruckpegel

ca. 102 dB

SPL

, 3 % Wellenverformung bei 1.000 Hz

(0 dB

SPL

= 2

× 10

-5

Pa)

Betriebstemperatur 0 ºC - 40 ºC

Mitgeliefertes Zubehör
Ansteckclip (1), Aufsatz (1), Zwischenstecker (Minibuchse

y

Stereoministecker) (1), Transportbehälter (1), Bedienungsanleitung (1)

Änderungen, die dem technischen Fortschritt dienen, bleiben vorbehalten.

Entsorgung von gebrauchten elektrischen und
elektronischen Geräten (anzuwenden in den
Ländern der Europäischen Union und anderen
europäischen Ländern mit einem separaten
Sammelsystem für diese Geräte)

Das Symbol auf dem Produkt oder seiner Verpackung weist
darauf hin, dass dieses Produkt nicht als normaler

Haushaltsabfall zu behandeln ist, sondern an einer Annahmestelle für das
Recycling von elektrischen und elektronischen Geräten abgegeben werden
muss. Durch Ihren Beitrag zum korrekten Entsorgen dieses Produkts
schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt
und Gesundheit werden durch falsches Entsorgen gefährdet.
Materialrecycling hilft, den Verbrauch von Rohstoffen zu verringern.
Weitere Informationen über das Recycling dieses Produkts erhalten Sie
von Ihrer Gemeinde, den kommunalen Entsorgungsbetrieben oder dem
Geschäft, in dem Sie das Produkt gekauft haben.

Die Gültigkeit des CE-Zeichens beschränkt sich ausschließlich auf die
Länder, in denen es gesetzlich erforderlich ist, vor allem im EWR
(Europäischer Wirtschaftsraum).

1 Tube à interférences

2 Microphone

3 Mini-fiche mono en L

plaquée or

4 Pieds du support

5 Pince

6 Porte-microphone

7 Glissière

1 Aufsatz

2 Mikrofon

3 Vergoldeter L-förmiger

Mono-Ministecker

4 Standfüße

5 Ansteckclip

6 Mikrofonhalter

7 Schieber

Printed on recycled paper

Advertising