Sharp XG-NV2SB - Manual (Page 18)

E-17
4. Connecting an external monitor
Connect your computer monitor to the projector’s COM-
PUTER RGB OUTPUT terminal to view images simulta-
neously on the external monitor and the projection
screen. Select either RGB 1 or RGB 2 to output the
images to the monitor.
4
Caution (Apple Macintosh):
Do not connect the COMPUTER RGB OUTPUT to any moni-
tor except the following:
Apple Color RGB Monitor 13
؆/14؆ (640 ן 480) or 16؆/17؆
(832 ן 624)
The output signal from the projector to the monitor should be
the same as the input signal from the computer to the
projector.
Example:
Input 13 ؆/14؆ (640 ן 480) →
Output (640 ן 480)
Input 16 ؆/17؆ (832 ן 624) →
Output (832 ן 624)
COMPUTER RGB IN 1
OUT
IN 2
Optional Macintosh
adaptor cable
External Macintosh
monitor
or
U.S.A. ONLY
External IBM-PC
monitor
Direct
connection
Notes:
• When using the projector with an external IBM-PC monitor, connect
the monitor using the supplied cable. When using the projector with a
Macintosh monitor, an optional adaptor cable is required. Before
using any other type of monitor, carefully check the monitor’s inter-
face specifications and make sure that they match the specifications
of the projector’s interface.
• The external monitor output will only display an analog computer
input signal. It will not display a digital or video input signal. To split
the composite video signal, use a video distribution amplifier. This is
available from your local dealer. The computer RGB output will only
loop through the same signal connected to the computer RGB input.
(VGA IN
→
VGA OUT, Mac IN
→
Mac OUT)