Sony BDP - S1 - Manual (Page 12)

12
Step 2: Connecting the Video Cords/HDMI Cord
D Connecting to an HDMI input jack
Use a certified Sony HDMI cord (not supplied) to enjoy high
quality digital picture and sound through the HDMI OUT jack.
You will enjoy higher quality pictures from 480p/720p/1080i, or
1080p (highest among the player output), if your TV, projector
or AV amplifier (receiver) is compatible.
When connecting to the HDMI OUT jack, carefully align the
HDMI connector with the jack. Do not bend or apply pressure to
the HDMI cord.
This Blu-ray Disc player incorporates High-Definition
Multimedia Interface (HDMI™) technology. HDMI, the HDMI
logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
About indicators for HDMI connection
After the player is turned on, the HD indicator on the front panel
lights up when outputting 720p/1080i/1080p video signals. The
HDMI indicator lights up when an HDMI device is connected.
Notes
• Consumers should note that not all high definition television sets are
fully compatible with this product and may cause artifacts to be
displayed in the picture. In the case of 480/720/1080 progressive scan
picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there are questions
regarding our TV set compatibility with this model 480p/720p/1080p
Blu-ray Disc player, please contact our customer service center.
• If the picture is not clear, natural, or to your satisfaction, change the
video output resolution by pressing VIDEO FORMAT (page 46).
If your TV has a CONTROL S jack
You can control the player by operating the remote, pointing it
toward the TV. This feature is convenient when you placed the
player and the TV away from each other.
After connecting the player to other device in pattern A, B, C,
or D above, connect the CONTROL S IN/IR IN jack to your
TV’s CONTROL S (OUT) jack using a control S cord (not
supplied). Refer to the instructions supplied with the TV to be
connected.
AC IN
CONTROL S IN/ IR IN
VIDEO OUT
COMPONENT VIDEO OUT
DIGITAL OUT PCM/DTS/DOLBY DIGITAL
5.1CH OUTPUT AUDIO OUT
VIDEO
Y
L
R
L
R
WOOFER
COAXIAL OPTICAL
FRONT REAR CENTER
P B
P R S VIDEO HDMI OUT
HDMI
OUT
HDMI IN
HDMI cord (not supplied)
Blu-ray Disc player
to HDMI OUT
TV, projector, or AV
amplifier (receiver)
AC IN
CONTROL S IN/ IR IN
VIDEO OUT
COMPONENT VIDEO OUT
DIGITAL OUT PCM/DTS/DOLBY DIGITAL
5.1CH OUTPUT AUDIO OUT
VIDEO
Y
L
R
L
R
WOOFER
COAXIAL OPTICAL
FRONT REAR CENTER
P B
P R S VIDEO HDMI OUT
CONTROL S IN/
IR IN
CONTROL S
to CONTROL S IN/IR IN
Control S cord (not supplied)
: Signal flow
TV
Blu-ray Disc player