Sony Ericsson CDP-CX220 - Manual (Page 11)

– 11 –
Partial lighting 1
Partial lighting 2
Partial lighting 3
Test Points Location:
AGING MODE
• Mode which repeatedly changes and plays back discs automati-
cally in the unit.
• It will repeat aging as long as no errors occur.
• If an error occurs during aging, it will stop all servos, motors,
etc. instantaneously, display the error number, and stop opera-
tions. However, the stopping conditions differ according to
whether the unit is equipped with the “self-protection function
during errors” described later.
The function serves to maintain the state of the unit when errors
occur.
Special Functions in Aging Mode
1. Disc setting mode:
5 discs are set before setting the aging mode. This mode makes
the setting of these discs more easy.
2. Self protection function during errors:
Function which voluntarily corrects errors which occur dur-
ing normal operations by retries.
If this function is not provided, all operations will be stopped
without retiring. It is suitable for checking errors with low re-
producibility.
If this function is provided, and errors can be corrected by
retries, aging will be continued without stopping.
3. Aging cycle count function:
Functions which displays the number of agings carried out on
the Fluorescent indicator tube in numbers. One aging cycle
consists of five discs.
A B C D E F G
O
O
2nd
**
O
* : Counter displayed
TP
(ADJ) IC501
CN509 CN508
IC506
TP
(AFADJ)
IC502
[MAIN BOARD] – Component Side –
1DISC
CD1
DISC
2
number of agings
* DISC-40 *
Sequence of Aging Mode
$
$
$
1. Disc change
2. Load in
3. TOC read
4. Access of last track
5. 3 second playback
6. Access of first track
7. 3 second playback
8. Load out
$
$
$
$
$
$
Order of Disc Change
(1 cycle takes 3 minutes)
$
$
$
1. No. 40
2. No. 120
3. No. 80
4. No. 200
5. No. 160
$
$
$