Sirius Satellite Radio STREAMER SIR-STRC1 - Manual (Page 33)

Streamer Replay SIR-STRC1 User Guide
33
Audio Level
The audio output of the Streamer Replay Receiver
can be adjusted to fi ne-tune the audio signal level
for maximum performance. This is important when
using either the optional Home Docking Station or
the optional Mobile Docking Station. The following
setting affects both the line output and FM output
levels. To change the Audio Level, perform the
following procedure while in the “Menu Options”
List mode:
1. Use the Rotary Knob to highlight the “Audio
Level Options”. Press the Rotary Knob to select.
2. Use the Rotary Knob to adjust to the desired
audio output level. A 10 segment horizontal bar
graph is displayed with a “-” sign to the left and a
“+” sign to the right. To store your setting and exit
this function, press the Rotary Knob.
Antenna Aiming
When using the optional Home Docking Station or
the Boombox indoors, it is important to locate the
antenna in an acceptable location (See the individual
installation guides for more information).
1. Use the Rotary Knob to highlight “Antenna
Aiming”. Press the Rotary Knob to select.
2. Two 10 segment horizontal bar graphs will be
displayed ( SAT and TER) with a “-” sign to the left
and a “+” sign to the right. SAT indicated satellite
signal and TER indicates terrestrial signal – if
available.
3. Adjust the antenna for maximum performance as
per the manuals.
To exit this function, press the Rotary Knob or MENU
button.