Sony XR200VE - Manual (Page 104)

10
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
Tips
If you have changed the battery pack while [AUTO] was selected, or taken your camcorder outdoors after
inside use (or vice versa), select [AUTO] and aim your camcorder at a nearby white object for about 10
seconds for better color balance adjustment.
When the white balance is set by [ONE PUSH], if the ambient lighting, etc., changes because you moved
your camcorder to or from outdoors, etc., you need to redo the [ONE PUSH] procedure to readjust the
white balance.
FADER
You can record a transition with the following effects adding to the interval between scenes.
Select the desired effect in [STBY] (to fading in) or [REC] (to fading out) mode.
Steps
In recording mode, (OPTION)
 
[FADER]

a desired setting
 
 OFF Does not use an effect.
WHITE FADER Fades in/out with the white effect.
Out In
BLACK FADER Fades in/out with the black effect.
Out In
To cancel the fader before starting the operation, touch [OFF].
Tips
When you press START/STOP, the setting is cleared.
BLT-IN ZOOM MIC (Built-in zoom microphone)
You can record a movie with directional sound as you zoom in or out.
Steps
In recording mode, (OPTION)
 
[BLT-IN ZOOM MIC]

a desired setting


 OFF The microphone does not record sound following zooming in or out.
ON ( )
The microphone records sound following
zooming in or out.




