Samsung HT-AS600 - Manual (Page 14)

• F.L (Front-Left) : -10 ~ +10dB
• CEN (Center) : -10 ~ +10dB
• F.R (Front-Right) : -10 ~ +10dB
• S.R (Surround-Right) : -10 ~ +10dB
• S.L (Surround-Left): -10 ~ +10dB
• S.W (Subwoofer): -10 ~ +10dB
To Exit Setup Mode
• Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. “SETUP
MODE OFF” appears on the display and exits Setup Menu.
26
Press SETUP button.
• “SETUP MODE” appears on the display and enters into Setup Mode.
Press INPUT button 7 times.
• “LEVEL SETUP” appears on the display.
Press SURROUND button.
• Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W
will be selected in turn.
Press SELECT( ) button to set to the speaker level you
want.
• You can adjust it from -10 to +10dB by 1 step.
• The sound gets smaller at -10dB and louder at +10dB.
• Default setting value is 00dB
Setting Speaker Level
MAIN UNIT
1
2
4
3
,
OPERA
TION
Setting Speaker Level
You can set the balance and level of speakers
Press SPK LEVEL button to select the speaker you want.
• Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W ➝
SPK LEVEL OFF will be selected in turn.
Press …† button to set the speaker level you want.
• You can adjust it from -10 to +10dB by 1 step.
• The sound gets quieter at -10dB and louder at +10dB.
• Default setting value is 00dB.
To Exit Setup Mode
• Wait for about 5 seconds or press SPK LEVEL button on the remote control to select
SPK LEVEL OFF.
25
√
Remote Control
1
2