Connections to other equipment – Sanyo DP19649 User Manual

Page 16

Advertising
background image

16

Connections to other equipment

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including

Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.

Coaxial digital cable

(not supplied)

AV Amplifier with built-in digital surround

decoder as listed above

Center Speaker

To DIGITAL AUDIO

COAXIAL OUT

To Coaxial

Digital Audio IN

Rear of the unit

Front

Speaker

(Left)

Front

Speaker

(Right)

Subwoofer

Surround

Speaker (Left)

Surround

Speaker

(Right)

TV

NOTE:

When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.

There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

To connect a HDMI or a DVI device to the unit

The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital

video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate

analog audio cords required.

Rear of the unit

HDMI - to - DVI adapter cable

(HDMI type A connector)

(not supplied)

Audio cord (not supplied)

HDMI cable (type A connector)

(not supplied)

To DVI output

To HDMI out

or

HDMI device

DVI device

To HDMI

IN

To PC/HDMI

AUDIO IN

NOTE:

When using HDMI to connect your HDMI or DVI devices, you must select the corresponding audio

input source (HDMI or DVI) on the menu screen (see page 20). Otherwise you will only see the

image with no sound.

If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable

or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To

receive the picture you must change the output resolution on the external component.

Should you require further instruction, please contact the manufacturer of the external component.

37I0521A_EnSp.indb 16

37I0521A_EnSp.indb 16

3/24/09 4:20:07 PM

3/24/09 4:20:07 PM

Advertising