Stanton Deck Control Surface SCS.1d - Manual (Page 2)

ii
Important Safety Instructions
• Read and follow the provided instructions before operating this unit.
• Adhere to all warnings and security advices, and retain this document for future reference.
Installation: Install the unit in accordance with the provided instructions
Power Supply:
• The unit should be connected to a power supply outlet only of the voltage and frequency marked on its rear panel.
• The power supply cord should be routed so that it is not likely to be walked on or pinched.
• The power supply cord of the unit should be unplugged from the wall outlet when it is to be unused for a long period of time, or during
electrical storms.
Placement and Environment:
• Locate the unit away from direct sunlight and any equipment that produces heat such as power supplies, amplifiers, and heaters.
• Place your mixer on stable surfaces, away from vibration and from sources that generate hum or noise, such as transformers, or electric
motors.
• The location and position of the unit should not interfere with its proper ventilation.
• Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool.
• To reduce the risk of fire or electric shock do not expose the equipment to rain or moisture or use it in damp or wet conditions.
• Protect the unit from excessive dirt and dust.
• Avoid drinks spillage, tobacco ash, and smoke (especially that associated with smoke machines).
• Do not place heavy objects on the unit surface.
Cleaning:
Unplug the unit from the wall outlet before cleaning. Never use benzene, thinner, or other solvents for cleaning. Use only a soft damp
cloth.
Service:
• The unit contains no user‐serviceable parts.
• The manufacturer is not responsible for any damage or personal injury resulting from unauthorized user servicing or modifications. Please
read the warranty.
• The warranty will be void if any unauthorized service by the user is detected.
• If service is required, please contact Stanton Tech at +1 954.316.1500 (Option 3)