Salton, Inc KM-1078 - Manual (Page 5)

HOW TO USE
1. Position the Base on a level, dry and stable work surface next to a 120 volt
A.C. outlet. Ensure that the Mixer Speed Dial is in the off ‘0’ position.
2. Push the Mixer Head Lock/Unlock Lever. The Mixer Head will rise
automatically.
3. Install the Bowl and desired accessory.
4. NOTE: If you wish to use the Splash Guard, add this accessory before
adding the desired attachment on the Accessory Shaft.
5. Ingredients may be added at this time into the Bowl. Use the Pouring
Spout to guide ingredients directly into the bowl.
6. Lower the Mixer Head until it clicks into place.
7. Plug the Mixer into the outlet.
8. Select the Mixer speed by slowly turning the Mixer Speed Dial to the
desired speed.
9. While the mixer is in the on position, use the Pouring Spout to guide any
additional ingredients.
10. Upon completion of mixing, turn the Mixer Speed Dial to the off ‘0’
position.
11. Unplug the power cord.
12. Push the Mixer Head Lock/Unlock Lever to raise the Mixer Head.
13. Remove the Splash Guard and the attachment from the Accessory Shaft.
14. Remove the Bowl from the Base.
5
Booklet_KM-1078_ENG 7/3/08 2:44 PM Page 5