3 - read all instructions before using the iron – Smartek ST-1200 User Manual

Page 3

Advertising
background image

- 3 -

READ ALL INSTRUCTIONS BEFORE USING THE IRON

1. Use the iron only for its intended purpose, for ironing fabrics

on board.

2. To protect against burns or injury to persons, do not iron or

steam fabrics while being worn on the body.

3. The iron should always be turned “OFF” before plugging or

unplugging from outlet. Never yank cord to disconnect from
outlet, instead, grasp plug and pull to disconnect.

4. Do not allow cord to touch hot surface. Allow the iron to cool

completely before storing.
Retract cord into cord reel unit when storing

5. Always disconnect iron from electrical outlet when filling or

emptying water and when not in use.

6. To avoid risk of electric shock, do not operate iron with a

damaged cord or if the iron has been dropped or damaged.
Do not disassemble the iron. Incorrect reassembly can
cause a risk of electric shock when the iron is used. For
repair, take it to a qualified serviceman.

7. Close supervision is necessary for this appliance being used

by or near children. Do not leave iron unattended while
connected or on an ironing board.

8. Burns can occur from touching hot metal parts, hot water, or

steam. Hot water may leak from the iron. Use caution when
filling or turning the steam iron upside down.

9. To protect against burns or injury to persons, do not direct

steam toward the body when ironing.

10. The iron must be used and rested on a stable surface.

When placing the iron on its stand, ensure that the surface
on which the stand is placed is stable.

Advertising
This manual is related to the following products: