Shoprider UL8W36 - Manual (Page 12)

3/13/2008 12
code and beep steadily if turned on. Refer to Table 1 for more
details.
Both left and right sides must be in drive mode for power chair to
operate. Otherwise the Powerchair will flash fault code of 9 lights
and will not operate.
Drive/Freewheel Mechanism
The drive/freewheel levers are found toward the rear of the
Powerchair, both on top left and one on right. These levers will
allow you to disengage the drive mechanism and push the
Powerchair while in freewheel mode. (FIG. 4)
Figure 4
Freewheel Levers
Drive Powerchair
set in motion