Samsung SP-L331 - Manual (Page 57)

Using 3-6
Temperature level status icons
Error The cooling fan 1 is not operating normally.
Refer to Action 1 in Clearing Indicatior
Problem.
Error The cooling fan 2 is not operating normally.
Error The cooling fan 3 is not operating normally.
Error The cooling fan 4 is not operating normally.
Error The cooling fan 5 is not operating normally.
Error The cooling fan 6 is not operating normally.
Warning
The internal temperature of the projector has
risen higher than the limit. Refer to Action 5 in Clearing Indicatior
Problem.
Error
The internal temperature of the projector has
risen higher than the limit. Refer to Action 5 in Clearing Indicatior
Problem.
Error
The internal temperature of the projector has
risen higher than the limit. Refer to Action 5 in Clearing Indicatior
Problem.
Warning The air filter has reached the end of its life. The air filter needs to be replaced.
Warning The air filter has been blocked by dust. The air filter needs to be cleaned.
Error The air filter has been blocked by dust. The air filter needs to be cleaned.
ICONS STATUS STATE MEASURES
Temperature status
The projector's internal temperature is
normal.(standby mode)
It's normal.
Temperature status
The projector's internal temperature is
normal.(low)
It's normal.
Temperature status
The projector's internal temperature is
normal.(medium)
It's normal.
Temperature status
The projector's internal temperature is
normal.(little bit high)
It's normal.
Temperature status
The projector's internal temperature is
higher than the limit. Refer to Action 4 in Clearing Indi-
catior Problem.
Temperature status
The projector's internal temperature is too
high. The projector is turned off automati-
cally.
Refer to Action 5 in Clearing Indi-
catior Problem.
ICONS STATUS STATE MEASURES