Samsung ITP-5121D User Manual

Page 5

Advertising
background image

5

T E L E C O M

PROGRAMMABLE BUTTONS LED INDICATORS

The programmable buttons, [Transfer] button, [Hold] button, and [Speaker] button have LEDs that light red, green or amber when
it is being used. The following table summarises the functions of LEDs.

PHONE STATUS INDICATOR

The status indicator is located on the upper right section of the LCD panel. It shows the status of the phone as described in the table.

USING FEATURE CODES

System features are programmed with default codes that you can dial to access the features. These are described in the relevant parts of
the guide. However, these codes may have been changed in programming; if so, you may find that a feature does not work as de-
scribed. In such cases, refer to your system administrator for the correct codes (or ask them to check with the installation technician
if they don’t know what they are).

SELECTING PROGRAMMED FUNCTIONS

The most convenient way to select functions on your phone is to have them registered on the programmable buttons, so that you
simply press the required button.Ifa functionisnotprogrammedonabutton, itcanbeselectedontheLCD panel using the Scroll button
and soft buttons.

An advantage of using the soft buttons for functions is that the programmable buttons can be used to assign more buttons for di-
rect extension selection and speed dialling.

Function

Button LED Status

External line or function is in use

LED is steady green.

New incoming call is ringing

LED is a fast flashing green

A call is on hold

LED is a slow flashing green or red

A held or transferred call is recalling to the phone

LED is a slow flashing amber

Status of Phone

Status Indicator

Busy on call / Off-hook

Steady red

Internal extension ring

Flashing red

External (C.O.) line ring

Flashing green

Transferred / held call recalling

Flashing amber

Message waiting

Flashing red

Calling denied

Fast flashing red

Advertising
This manual is related to the following products: