Samsung WD1950 - Manual (Page 26)


English
Using the M
enus
Sound
Option Description
Sound Reset You can restore the Sound settings to the factory defaults.
Selecting the Sound Mode
You can set the sound mode by pressing the DUAL button. When you press it, the current
sound mode is displayed on the screen.
Audio Type Dual 1 / 2 Default
A2
Stereo
Mono MONO
Automatic change
Stereo STEREO ↔ MONO
Dual DUAL 1 ↔ DUAL 2 DUAL 1
NICAM
Stereo
Mono MONO
Automatic change
Stereo MONO ↔ STEREO
Dual
MONO ↔ DUAL 1
DUAL 2
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound
signal.
This function is only available in TV mode.
■
■
■
BN68-01893J_Eng.indd 26 2009-03-31 �� 12:53:11