Swann SW231-WOY - Manual (Page 6)

6 6 6 6
Viewing the Camera on a TV or VCR
Viewing the Wireless OutdoorCam connected directly to a TV
1. Connect the Camera and Receiver as described in Connection Guide Direct
to TV on page 4
2. Plug in the Receiver and Cameras
3. Turn on your TV
4. Press the INPUT button on your TV’s Remote Control until your camera /
receiver appears on screen. The majority of TVs will label this button as INPUT,
A/V, SOURCE, AUX, TV/AV, Channel 0. If you are unable to change the input on
your TV, consult the TV’s instruction manual or contact your
TV’s manufacturer.
Viewing and Recording the Wireless OutdoorCam on a VCR or DVD
Recorder
1. Connect the camera and receiver as described in the VCR/DVD Recorder
Connection Guide
2. Plug in the Receiver and Cameras
3. Turn on your TV and VCR
4. Play a tape to confi rm your TV is on the correct channel, then press stop
5. Press the INPUT button on your VCR’s Remote Control until your camera /
receiver appears on screen. The majority of TVs will label this button as INPUT,
A/V, SOURCE, AUX, TV/AV, Channel 0. If you are unable to change the input on
your TV, consult the TV’s instruction manual or contact your
TV’s manufacturer.
*The INPUT button is sometimes labeled Input, Source, Line In, L1, L2, AUX,
A/V, channel 0 etc. Consult the TV or VCR instruction manual for details about
changing input channels on your device.
31 31
Ajustando / Cambiando el Canal de la Cámara
La OutdoorCam Inalámbrica funciona en un rango de frecuencia 2.4 GHz. Es ca-
paz de transmitir en 4 canales. Siga los pasos a continuación para ajustar o cambiar
el canal de frecuencia de la cámara.
Canal1 Canal 3 Canal 2 Canal 4
Jale para abrir la aleta de hule en el
cable de energía de la cámara.
Localice los 2 interruptores
dip bajo la aleta de hule.
Use la Herramienta del Interruptor
Dip para mover los interruptores
para cambiar los canales de trans-
misión de la cámara.
Ajuste el canal de la cámara según la confi guración de interruptor
a continuación. No ajuste las cámaras múltiples en el mismo canal
o aparecerá interferencia en la pantalla.
1
2
3
4
1 2 1 2 1 2 1 2