Sennheiser Evolution SKM 300 - Manual (Page 16)

15
Using the radio microphone
̈
From the “ Mute Mode ” menu item, select the desired
setting (see page 25).
̈
Exit the operating menu.
̈
Briefly press the MIC button
»
or keep it pressed.
The radio microphone reacts as indicated in the table.
“ RF On/Off ” Press briefly Deactivates the
RF signal
(offline operation)
Activates the RF signal
(online operation)
“ Push To
Mute ”
Keep pressed Mutes the audio signal
temporarily
(cough function)
“ Push To
Talk ” *
Keep pressed Unmutes the audio
signal temporarily
(speech function)
“ Disabled ” No function
* If you select “ Push To Talk ”, the radio microphone will be
muted until you press the MIC button.
The current state of the muting function or the
RF signal is displayed on the display panel of the
radio microphone (see next section).
An additional display of the muting function
appears on the receiver’s display panel when
• the pilot tone function is activated on both radio
microphone and receiver
and, in addition,
• this display has been activated via the “ Warn-
ings ” menu item on the receiver (see the instruc-
tion manual of the receiver).
Audio signal is muted
MIC button
»
: not backlit
Radio microphone’s display
panel: “ MUTE ”
ቨ
is displayed
Receiver’s display panel: “ TX Mute ” is displayed *
* only when activated on the receiver (see above)
Setting MIC button
» ... Function
MHz 531.375
ew300 G3
MUTE P
AF
ቨ
ብ
»