Saddle stitch finisher specifications – Sharp MX-4100N User Manual
Page 16
14
SPECIFICATIONS
Saddle stitch finisher specifications*
1
*1 Paper pass unit and stand/1x500 sheet paper drawer or stand/2x500 sheet paper drawer are required to connect the saddle stitch
finisher to the machine.
*2 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of
paper, and the storage conditions of the paper.
*3 Up to 30 envelopes can be output.
*4 The height of the sheets must not exceed 6-57/64" (175 mm).
*5 The height of the sheets must not exceed 3-45/64" (94 mm).
*6 The maximum number of sheets for stapling assumes a paper weight of 24 lbs. (90 g/m
2
) and includes two cover sheets of 28 lbs.
bond to 140 lbs. index (106 g/m
2
to 256 g/m
2
).
*7 Allowed paper weights for saddle stitch stapling of plain paper include heavy paper (28 lbs. bond to 140 lbs. index (106 g/m
2
to
256 g/m
2
)).
Model
MX-FN10
Paper sizes
12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, envelopes, A3W, A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR
Paper weight
Thin paper (15 lbs. to 16 lbs. (55 g/m
2
to 59 g/m
2
)) plain paper (16 lbs. to 28 lbs. (60 g/m
2
to 105 g/m
2
)) heavy
paper (28 lbs. bond to 140 lbs. index (106 g/m
2
to 256 g/m
2
)), envelopes (20 lbs. to 24 lbs. (75 g/m
2
to 90 g/m
2
))
Modes
Non-staple, staple, saddle stitch, half fold (Output is folded in half one sheet at a time.)
Allowed paper sizes for offset
11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
7-1/4" x 10-1/2"R, A3, A4, A4R, B4, B5, B5R, 8K, 16K, 16KR
Offset distance
1-3/16" (30 mm)
Tray capacity*
2
Non-stapling*
3
:
1000 sheets*
4
(8-1/2" x 11", 8-1/2" x 11"R,
7-1/4" x 10-1/2"R, A4, A4R, B5, B5R, 16K, 16KR)
500 sheets*
5
(12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
5-1/2" x 8-1/2"R, A3W, A3, B4, A5R, 8K)
Stapling*
6
:
50 sets or 1000 sheets*
4
(8-1/2" x 11",
8-1/2" x 11"R, A4, A4R, B5, B5R, 16K, 16KR)
50 sets or 500 sheets*
5
(11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
A3, B4, 8K)
Power supply
Supplied from the machine
Dimensions
25-53/64" (W) x 24-27/32" (D) x 38-57/64" (H) (656 mm (W) x 631 mm (D) x 988 mm (H))
(When tray is extended)
Weight
Approx. 88.2 lbs. (40 kg)
Stapler section
Allowed paper sizes for
stapling
11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
A3, B4, A4, A4R, B5, B5R, 8K, 16K, 16KR
(Three stapling positions: one staple at bottom left corner, one staple at top left corner, and two staples.)
Maximum number of
sheets for stapling*
6
50 sheets (8-1/2" x 11", 8-1/2" x 11"R, A4, A4R, B5, B5R, 16K, 16KR)
25 sheets (11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", A3, B4, 8K)
(25 sheets when the sheets are the same width but different lengths.)
Saddle stitch section
Stapling method
Fold in half and staple in two places on centerline
Folding position
Fold at centerline (can be adjusted with [Saddle Stitch Position Adjust] in the System Settings)
Allowed paper sizes for
saddle stitch stapling
11" x 17", 8-1/2" x 14", 8-1/2" x 11"R, A3, B4, A4R, 8K, 16KR
Allowed paper weights for
saddle stitch stapling
15 lbs. bond to 140 lbs. index (55 g/m
2
to 256 g/m
2
)*
7
Number sheets for saddle
stitch stapling / Number of sets
Maximum: 15 sheets (21 lbs. (80 g/m
2
) x 14 sheets + 110 lbs. index (209 g/m
2
) x 1 sheet) / 10 sets
(11 to 15 sheets), 15 sets (6 to 10 sheets), 20 sets (1 to 5 sheets)
Note:
Special media such as transparency film and label sheets cannot be stapled or punched.
mx5001_us_saf.fm 14 ページ ２００８年９月２４日 水曜日 午前９時４５分