Sierra Wireless RAVEN 20080605 - Manual (Page 34)

Connecting the Raven XE
Rev 1.0 Oct.09 28
Tip: If you have configured the Raven XE for settings different than
the defaults for Bits per Second, Data Bits, Parity, and/or Stop Bits,
you will need to use your changed settings.
c. Select OK.
Using Ethernet:
d. Select TCP/IP (Winsock) for “Connect Using”.
e. Change the “Port Number” to 2332.
f. Select OK.
3. Connected
Connecting on USB/net will prompt for password.
192.168.14.31