Sony DAV-DZ20 - Manual (Page 15)

15 GB
Ge
tting
Star
te
d –
B
A
SIC –
13
Press X/x to select the surround
speaker distance from the listening
position, then press
.
Quick Setup is finished. All connections
and setup operations are complete.
To quit the Quick Setup
Press DISPLAY in any Step.
Tip
• If you change the position of the speakers, reset the
speaker settings. See “Getting Optimal Surround
Sound for a Room” (page 57).
• If you want to change any of the settings, see “Using
the Setup Display” (page 59).
To recall the Quick Setup display
1
Press DISPLAY when the system is in
stop mode.
The Control Menu display appears.
2
Press X/x to select [SETUP], then
press .
The options for [SETUP] appear.
3
Press X/x to select [QUICK], then press .
The Quick Setup display appears.
Selecting the output method for
video signals
Selects the output method for video signals from
the EURO AV T OUTPUT (TO TV) jack on
the rear panel of the unit.
1
Press FUNCTION repeatedly to select
“DVD.”
2
Press VIDEO FORMAT.
Each time you press VIDEO FORMAT, the
display changes as follows:
• “LINE VIDEO”: outputs video signals.
• “LINE RGB”: outputs RGB signals.
Note
• If your TV does not accept RGB signals, no
picture appears on the TV screen even if you
select “LINE RGB.” Refer to the operating
instructions supplied with your TV.
1 2 ( 2 7 )
QUICK
QUICK
RESET
DVD VIDEO
BNR
T 0 : 0 0 : 0 2
1 8 ( 3 4 )
CUSTOM
VIDEO
FORMAT
FUNCTION
t
LINE VIDEO
r
LINE RGB