Sound Performance Lab MMC2 - Manual (Page 3)

3
Contents
Fade In ................................................................................................ 4
Signal Flow .......................................................................................... 5
Front Panel .......................................................................................... 6
Control Elements ................................................................................ 7
Sources, Input Trims ........................................................................... 7
Insert/Return, Speaker Management, Monitors .................................. 8
Monitor Level ...................................................................................... 9
Option: MasterBay ............................................................................. 10
Rear Panel, XLR Wiring, Metering Out .................................................. 11
Measurements .................................................................................... 12-18
Specifi cations, Power Supply .............................................................. 19
Warranty ............................................................................................. 20
Before you operate the unit, fi rst check carefully whether the local voltage
setting corresponds to the setting on the external transformer!
Before switching on external transformer and MMC 2, the MMC 2 must be
connected to the external transformer with the supplied multicore lead. Pay
attention to a secure connection.
The MMC 2 and the external transformer should be situated away from heat
sources and direct sunlight. MMc 2 and transformer need suffi cient air circu-
lation. Avoid installation in environments exposed to vibrations, dust, heat,
cold, moisture or electrical and magnetic fi elds.
Do not install the unit in proximity to power amplifi ers or digital processors.
You may consider placing it near other analog gear. Such placement can
prevent interference from Word Clock, MIDI, etc.
• Do not open the case. You may risk severe electric shock and may damage
your equipment.
• Leave repairs and maintenance to a qualifi ed service technician. Should any
objects fall inside the case, unplug the power supply and contact a quali-
fi ed technician.
• To avoid electric shock or fi re hazards do not expose the unit to rain or
dampness.
• In case of lightning unplug the power supply.
• Never force a switch or knob.
• Use a lint-free cloth for cleaning. Avoid any cleaning agents as they may
damage the fi nish, use an acid-free cleaning oil instead.
• Support the back of the unit when it is being mounted.
Installation/Security Advices